Introduction

The aim of this qualification is to assess learners against the national standard in a realistic high risk environment. This will include;

  • Preparing to work safely
  • Entering and exiting confined spaces safely
  • Preparing and using appropriate breathing apparatus for working and escape purposes
  • Using equipment and tools safely
  • Following procedures
  • Dealing with emergencies

There is also a behavioral emphasis on the learner undertaking the assessment in an efficient and safe manner. The learner will demonstrate sufficient knowledge and understanding of high risk confined spaces, and will demonstrate the appropriate practical skills, through a mix of practical observation and written assessment.

This Course is available for Water (6150-03) or Non-Water (6150-53)

Non-Entrant Top Persons Training/Assessment is also available Water (6150-14) or Non-Water (6150-54)

Course Designed For

This course is designed for entrants entering confined spaces with the following characteristics;

  • Mechanical hazards
  • Physical complexity of system introduced hazards
  • Enhanced specific intrinsic hazards
  • Thermal hazards
  • Internal configuration in which an entrant could become trapped or asphyxiated
  • Complex entries to include split level chambers, Double bottom hulls, Deep wet-wells

All of the above characteristics would be classified as non standard entries involving complex operations which introduce additional risks and require specific controls and rescue arrangements.

These courses have been developed for the following industries/sectors

  • Agriculture
  • Horticulture and Forestry
  • Engineering
  • Manufacturing Technologies
  • Building and Construction

Course Pre-requisites

Learners must be medically fit to attend this course. Confirmation of a valid medical certificate may be required prior to course commencement.

Course Content

  • Prepare to enter and work safely in high risk confined spaces
  • Enter and exit confined spaces safely
  • Prepare and use appropriate respiratory protective equipment (RPE) for working (and escape) purposes in accordance with manufacturers’ specifications
  • Use equipment and tools safely and in accordance with manufacturers’ instructions
  • Follow procedures and work safely
  • Deal with emergencies
  • Use appropriate behaviour for working in high risk confined spaces
  • Use appropriate knowledge for working in high risk confined spaces
  • Apply relevant industry standards for working in high risk confined spaces

Course Qualification

Learners will obtain certification from City & Guilds (awarding body)

Registration card can be issued upon request (HSCT)

Refresher Training

3 Years until refresher is required as per HSE guidance (Full course)

Manufacturers guidance on breathing apparatus advises that refresher training for the use and operation of their equipment should be every 2 years

Course Venue

HSCT Facilities (only) – 50 Nuttscorner Road, Crumlin, BT29 4SQ

Course Duration

3 Days

Course Size

Maximum of 12 candidates per instructor

Maximum of 5 candidates per assessor (per day)

Course Assessment

  • Written Assessment
  • Practical Assessment